© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.01 Building Scalable Cisco Internetworks Course Administration Guide. - презентация

1 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.01 Building Scalable Cisco Internetworks Course Administration Guide

2 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.02 Visual Objective for Lab 2-0: Basic Configuration

3 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.03 Visual Objective for Lab 2-1: Configuring and Tuning EIGRP

4 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.04 Visual Objective for Lab 3-1: Configuring Single-Area OSPF

5 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.05 Visual Objective for Lab 3-2: Configuring OSPF for Multiple Areas and Frame Relay Nonbroadcast

6 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.06 Visual Objective for Lab 3-3: Configuring OSPF for Multiple Areas and Frame Relay Point-to-Multipoint and Point-to-Point

7 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.07 Visual Objective for Lab 3-4: Tuning OSPF

8 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.08 Visual Objective for Lab 4-1: Configuring Integrated IS-IS

9 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.09 Visual Objective for Lab 5-1: Configuring Basic Redistribution

10 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.010 Visual Objective for Lab 5-2: Tuning Basic Redistribution with Cisco IOS Tools

11 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.011 Visual Objective for Lab 6-1: Configuring Multihome BGP

12 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.012 Visual Objective for Lab 6-2: Manipulating BGP Path Selection with Route Maps

13 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.013 Visual Objective for Lab 7-1: Configuring Multicast Routing

14 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.014 Visual Objective for Lab 8-1: Configuring IPv6 Addresses The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 The IPv4 addresses remain in place.

15 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.015 Visual Objective for Lab 8-2: Enabling IPv6 OSPF Routing The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 The IPv4 addresses remain in place.

16 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.016 Visual Objective for Lab 8-3: Configuring IPv6 Tunnels The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 z = A for tunnel interface The IPv4 addresses remain in place.

17 © 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.017