Copyright DASSAULT SYSTEMES 20021 CATIA Training Exercises Version 5 Release 8 January 2002 EDU-CAT-E-PRO-FX-V5R8 CATIA Tools for Proficient Users. - презентация

1 Copyright DASSAULT SYSTEMES CATIA Training Exercises Version 5 Release 8 January 2002 EDU-CAT-E-PRO-FX-V5R8 CATIA Tools for Proficient Users

2 Copyright DASSAULT SYSTEMES Table of Contents 1. Knowledge Common Toolsp.3 Rename dimensions p.7 Add Relationsp.8 Drive Part by Parametersp.9 Create Design tablep.10 Using Design tablep.11

3 Copyright DASSAULT SYSTEMES Exercise In this exercise you will : Create new parameters to drive all dimension by Formulas Build a family of parts with a design table using the current parameters 50 min Knowledge Common Tools

4 Copyright DASSAULT SYSTEMES Skills needed : Creating a parameter Accessing a parameter definition Constraining a Dimension by a formula Creating a Design Table Using a Design Table Design Intent: Knowledge Common Tools From Initial sketcher To result sketcher

5 Copyright DASSAULT SYSTEMES Rename dimensions to drive them more easily. Design Process: Knowledge Common Tools 1 Add relations between Ellipse 2 and Ellipse 3 2 Add Parameters and relations to drive Ellipse Dimensions 3

6 Copyright DASSAULT SYSTEMES Create Design Table. 3 configurations Design Process: Knowledge Common Tools 4 Using Design Table 5

7 Copyright DASSAULT SYSTEMES Rename all Dimensions Do It Yourself (1/5) Ellipse1 Major_axis1=40mm Minor_axis1=25mm Ellipse2 Major_axis2=20mm Minor_axis2=15mm Ellipse3 Major_axis3=12.5mm Minor_axis3=10mm Ellipse1 Ellipse3 Ellipse2 Load: Tire_step1.CATPart

8 Copyright DASSAULT SYSTEMES Add Relations between Ellipse2 and Ellipse3 Do It Yourself (2/5) Load: Tire_Step2.CATPart

9 Copyright DASSAULT SYSTEMES Do It Yourself (3/5) Drive Part by Parameters Create New Parameters of type lenght Create Relations between dimensions and these New parameters Driving Parameters All Dimensions are driven by parameters Load: Tire_step3.CATPart

10 Copyright DASSAULT SYSTEMES Do It Yourself (4/5) Create Design Table Select Parameters to insert : Minor_Ellipse1, Major_Ellipse1, Minor_Ellipse2, Major_Ellipse2 Once the design table is displayed in CATIA, Edit the excel file, then add two new configurations 3 Configurations Load: Tire_step4.CATPart

11 Copyright DASSAULT SYSTEMES Do It Yourself (5/5) Using Design Table