Скачать презентацию
Идет загрузка презентации. Пожалуйста, подождите
Презентация была опубликована 10 лет назад пользователемОлег Карпушкин
1 Program File Load (PC Programming) Operation1: Program File Transfer You must prepare the program file on your HDD beforehand. c.After you decided the program file, this dialogue box appears. Program file transfer takes a few minutes by USB. When transfer finished, completed message appears, and program file name is registered automatically into the memory. (See Operation3) b.Select File Transfer PC to PBX Then file select dialogue box appears, you can select target program file. a. Select Utility
2 Program File Load (PC Programming) Operation2: Card status change to out of service Program file load is available only for out of service status card. Open Configuration-SLOT screen and change the status. b.Click OUS button for change the status. a.Click status cell of target card. Then, Command dialogue box appears.
3 Program File Load (PC Programming) Operation3: Program File View and Load (1/4) It shows the file which is available for download. b. Select SD Card File View and Load Then following screen appears. c.This screen gives an information as kind of files that the memory card has. The first character of the program file is P. For example, PDHLC is DHLC/DLC cards program. a. Select Utility
4 Program File Load (PC Programming) Operation3: Program File View and Load (2/4) You must select target program file from the memory. d.Select target program file. PDHLC: DHLC / DLC PSLC: SLC PT1: T1 PE1: E1 PBRI: BRI PPRI23: PRI23 PPRI30: PRI30 PEM: E&M PIPGW: IP-GW PCTILINK: CTI-LINK PCSINF: CSINF POPB3: OPB3 e.Click the Button. [Detail]: When you load the card program, click this button. Then program file details is shown. Except for program file, this button is invalid. [Cancel]: Close this screen.
5 Program File Load (PC Programming) Operation3: Program File View and Load (3/4) It shows program file header information. f.Program file header information of the memory. g.Select target card. It shows current available card number and name. [All]: Load to all available card. h.Click the [View] Button. Program file header information of the target card is shown.
6 Program File Load (PC Programming) Operation3: Program File View and Load (4/4) You should compare header information of card and memory. i.Click the [Load] Button. Program file load is started. The load takes a few minutes. When loading finished, completed message appears, and target card will change in service status automatically. j.Click the [Cancel] Button. This screen disappears.
Еще похожие презентации в нашем архиве:
© 2024 MyShared Inc.
All rights reserved.