Скачать презентацию
Идет загрузка презентации. Пожалуйста, подождите
Презентация была опубликована 10 лет назад пользователемВалентин Шлындин
1 Take out three screws by screwdriver. LR009 disassembling scheme (1)
2 Open Main board shells by useless card LR009 disassembling scheme (2)
3 1. Untie the electric fabric ; 2. Pull out the FPC plug from main board. LR009 disassembling scheme (3)
4 Take out PCB from shells LR009 disassembling scheme (4)
5 Press the rotor and take out it by forceps LR009 disassembling scheme (5)
6 Take out FPC from the gap of main board top shell Attention: Take out FPC softly, avoid damaging the FPC or breaking it. LR009 disassembling scheme (6)
7 Take out three screws showed with arrows. Do not forget the screw covered by GPRS label LR009 disassembling scheme (7)
8 Detach the folder shells by useless card LR009 disassembling scheme (8)
9 Take out LCM from folder shells. LR009 disassembling scheme (9)
10 Put LCM into folder shells. Attention: Firstly put the FPC into rotor groove. LR009 assembling scheme (1)
11 Close the folder shells, please make sure there is no gaps between top and bottom shell. LR009 assembling scheme (2)
12 Push rotor, pull the folder at the same time, when you hear click sound, the rotor has been installed. LR009 assembling scheme (3)
13 Put PCB onto top shell, it is easier to install from the front. LR009 assembling scheme (4)
14 Install sidekey. Pay attention to the direction of sidekey. LR009 assembling scheme (5)
15 Close the shells, check the gap, if there are gap, please detach them and reinstall. Assembling is finished. LR009 assembling scheme (6)
Еще похожие презентации в нашем архиве:
© 2024 MyShared Inc.
All rights reserved.