MSC.Software Corporation 2 MacArthur Place Santa Ana, CA 92707, USA Tel: (714) 540-8900 Fax: (714) 784-4056 Web: United States MSC.Patran Support Tel: - презентация

1 MSC.Software Corporation 2 MacArthur Place Santa Ana, CA 92707, USA Tel: (714) Fax: (714) Web: United States MSC.Patran Support Tel: Fax: (714) Tokyo, Japan Tel: Fax: Munich, Germany Tel: (+49) Fax: (+49) August 2001 MVI320 Course Notes P/N MV*V3.4*Z*Z*Z*SM-MVI320-NT1 Введение в MSC.MVISION ПРАКТИЧЕСКИЕ ЗАНЯТИЯ

2 DISCLAIMER The MSC.Software Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice. Although due care has been taken to present accurate information, THE MSC.SOFTWARE CORPORATION DISCLAIMS ALL WARRANTIES WITH RESPECT TO THE CONTENTS OF THIS DOCUMENT (INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) EITHER EXPRESSED OR IMPLIED. THE MSC.SOFTWARE CORPORATION SHALL NOT BE LIABLE FOR DAMAGES RESULTING FROM ANY ERROR CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, THE USE OF THIS DOCUMENT. MSC and MSC. are registered trademarks and service marks of The MSC.Software Corporation. PATRAN and MSC.Patran are registered trademarks of The MSC.Software Corporation. MSC.Fatigue, MSC.Laminate Modeler, MSC.Marc, and MSC.Marc/Mentat are registered trademark of The MSC.Software Corporation. ABAQUS is a registered trademark of Hibbitt, Karlsson, & Sorensen, Inc. ANSYS is a registered trademark of ANSYS, Inc. CADDS 5 and Computervision are trademarks of Computervision R&D Inc., a subsidiary of Prime Computer, Inc. CATIA is a registered trademark of Dassault Systemes. EUCLID is a registered trademark of Matra Datavision, S.A. IGES is an acronym for the Initial Graphics Exchange Specification, published by the U.S. Department of Commerce, National Institute of Standards and Technology. MARC is a registered trademark of MARC Analysis Research Corporation. Motif is a trademark of the Open Software Foundation, Inc. MSC.Nastran is an enhanced proprietary version developed, maintained, supported and marketed by The MSC.Software Corporation. NASTRAN is a registered trademark of the National Aeronautics and Space Administration. Pro/ENGINEER is a trademark of Parametric Technology Corporation. Unigraphics is a registered trademark of EDS Unigraphics Division. UNIX is a trademark of AT&T Bell Laboratories. X Window System is a trademark of the Massachusetts Institute of Technology. MSC.Mvision is a trademark of The MSC.Software Corporation. MSC.Mvision Evaluator is a trademark of The MSC.Software Corporation. MSC.Mvision Builder is a trademark of The MSC.Software Corporation. Training Documentation: Copyright 2001 MSC.Software Corporation. All Rights Reserved. This notice shall be marked on any reproduction of this documentation, in whole or in part. Any reproduction or distribution of this document, in whole or in part, without the prior written consent of The MSC.Software Corporation is prohibited. If you would like to order more copies of this document, please contact MSC Contracts Processing at (800) U.S.A. orders: All orders must be accompanied by a check or purchase order. Your order will be sent prepaid via UPS or fourth class mail and the shipping charges will be added to the invoice. F.O.B. will be the shipping point. Terms are net amount due within 30 days. Outside U.S.A. orders: Please contact your local MSC office for a quotation.