1st step: Make sure the connects and power supple well, if all connect well, the power light internet light wireless light LAN light will light Internet. - презентация

1 1st step: Make sure the connects and power supple well, if all connect well, the power light internet light wireless light LAN light will light Internet connect LAN connects Reset button Power connect LAN light Power light Internet light Wireless light

2 2nd step: First router and the computer connection number, network card automatically obtain IP addresses change, do not manually specified (Figure 1) connected, double-click the connection we have a good card, see the default gateway is (Figure 2) This is mainly to see whether your computer and the router connected up properly

3 3rd step D-Link DIR-600M had presented randomly with the use of manual, illustrated the way tell the user how to complete the installation settings. The wireless routing, computer connected to the computer set to automatically obtain the IP state, until the IP to be successful, open the browser and type " will be able to access to the routing of the web admin interface. Click here to set by Automatic

4 input the user name and the password is blank

5 4th step D-Link DIR-600M had presented randomly with the use of manual, illustrated the way tell the user how to complete the installation settings. The wireless routing, computer connected to the computer set to automatically obtain the IP state, until the IP to be successful, open the browser and type " will be able to access to the routing of the web admin interface. Click here to set the wired internet

6 Click next

7 Click here to get the ip address Automatically Access mode choice Set the Internet Marked wireless network Wireless encryption settings Complete set

8 Click here to input your computer MAC address Click here to input host name Click here to set by automatic

9 Click here to input wireless host name

10 Click here to choose the Encryption Click here to input password

11 Save the set then test the internet

12 5 step: wireless set Marked wireless network Advancedtools Status help Wireless operating modes

13 Password Type Shared key

14 Save the set

15 Please reference the manual and this explanation together Thank you!