© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.01© 2005 Cisco Systems, Inc. All rights reserved. Building Scalable Cisco Internetworks BSCI v3.01

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.02 Course Lab Guide

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.03 BSCI Lab Topology

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.04 Topology for Your Pod

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.05 Visual Objective for Lab 2-0: Basic Configuration

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.06 Visual Objective for Lab 2-1: Configuring and Tuning EIGRP

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.07 Visual Objective for Lab 3-1: Configuring Single-Area OSPF

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.08 Visual Objective for Lab 3-2: Configuring OSPF for Multiple Areas and Frame Relay Nonbroadcast

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.09 Visual Objective for Lab 3-3: Configuring OSPF for Multiple Areas and Frame Relay Point-to-Multipoint and Point-to-Point

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.010 Visual Objective for Lab 3-4: Tuning OSPF

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.011 Visual Objective for Lab 4-1: Configuring Integrated IS-IS

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.012 Visual Objective for Lab 5-1: Configuring Basic Redistribution

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.013 Visual Objective for Lab 5-2: Tuning Basic Redistribution with Cisco IOS Tools

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.014 Visual Objective for Lab 6-1: Configuring Multihome BGP

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.015 Visual Objective for Lab 6-2: Manipulating BGP Path Selection with Route Maps

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.016 Visual Objective for Lab 6-2: BGP Peering Sessions

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.017 Visual Objective for Lab 6-2: BGP Path Manipulation

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.018 Visual Objective for Lab 7-1: Configuring Multicast Routing

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.019 Visual Objective for Lab 8-1: Configuring IPv6 Addresses The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 The IPv4 addresses remain in place.

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.020 Visual Objective for Lab 8-2: Enabling IPv6 OSPF Routing The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 The IPv4 addresses remain in place.

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.021 Visual Objective for Lab 8-3: Configuring IPv6 Tunnels The format for the IPv6 addresses used in this lab is: 2001:0410:000x:z::/64 eui-64 x = Pod number z = 1 for fa0/0 between R1 and R3 z = 2 for fa0/0 between R2 and R4 z = 3 for s0/0/1 between R1 and R2 z = 4 for s0/0/0 between R3 and R4 z = A for tunnel interface The IPv4 addresses remain in place.

© 2006 Cisco Systems, Inc. All rights reserved.BSCI v3.022