Date:29.09.2014 File:GRAPH_04e.1 SIMATIC S7 Siemens AG 2000. All rights reserved. SITRAIN Training for Automation and Drives Debug and Start-Up.

Презентация:



Advertisements
Похожие презентации
Date: File:GRAPH_04e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Отладка и пуск.
Advertisements

Date: File:GRAPH_03e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Programming Steps and Transitions.
Date: File:GRAPH_08e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Diagnostics.
Date: File:GRAPH_02e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Project Planning and Configuration.
Date: File:GRAPH_07e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Auto EnableAuto FInPos Motor.
Date: File:GRAPH_06e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Event-Dependent Actions and.
Date: File:GRAPH_05e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Documentation and ASCII Archives.
Date: File:GRAPH_07e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Auto EnableAuto FInPos Motor.
Date: File:GRAPH_02e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Project Planning and Configuration.
Date: File:System_Rep._11.1 SIMATIC HMI Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Отчеты.
© 2006 Cisco Systems, Inc. All rights reserved. CIPT1 v Administration of Cisco Unified CallManager Release 5.0 Configuring Cisco Unified CallManager.
Date: File:GRAPH_01e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Introduction.
Date: File:GRAPH_05e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Документирование и архивы.
© 2006 Cisco Systems, Inc. All rights reserved.CIPT2 v Monitor and Manage IP Telephony Introducing Cisco Unified CallManager Serviceability.
Date: System_Databases_9.1 SIMATIC HMI Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Хранение архивов в базах.
Date: System_Supplements_12.1 SIMATIC HMI Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Примеры.
© 2006 Cisco Systems, Inc. All rights reserved. CVOICE v Configuring Voice Networks Configuring Router Voice Ports.
Date: File:MICRO_03D.1 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Учебный стенд.
© 2005 Cisco Systems, Inc. All rights reserved.INTRO v Operating and Configuring Cisco IOS Devices Starting a Switch.
© 2009 Avaya Inc. All rights reserved.1 Chapter Two, Voic Pro Components Module Two – Actions, Variables & Conditions.
Транксрипт:

Date: File:GRAPH_04e.1 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Debug and Start-Up

Date: File:GRAPH_04e.2 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Debug and Start-Up: Target

Date: File:GRAPH_04e.3 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Compile / Save Tab (1)

Date: File:GRAPH_04e.4 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Compile / Save Tab (2)

Date: File:GRAPH_04e.5 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Compile / Save Tab (3)

Date: File:GRAPH_04e.6 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Compile / Save Tab (4)

Date: File:GRAPH_04e.7 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Minimum call parameters - 1 input parameter for sequencer control Standard call parameters - 12 input parameters for sequencer control - 7 output parameters for displaying operating states - Input/output parameters do not need to be set (default values) Integration into OB1, Types of FB Call (1)

Date: File:GRAPH_04e.8 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Maximum call parameters - 17 input parameters for sequencer control - 12 output parameters for displaying operating states - Parameters do not need to be set (default values) Types of FB Call (2)

Date: File:GRAPH_04e.9 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Maximum V5 (user-defined) - 29 input parameters for sequencer control - 32 output parameters for displaying operating states - Parameters need not be set - Parameters that are not required can be deselected - Additional parameters can be custom-defined Types of FB Call (3)

Date: File:GRAPH_04e.10 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Input parameter set: Output parameter set: User-Defined Parameter Set (V5.0 and higher)

Date: File:GRAPH_04e.11 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Static variables Temporary variables User-Defined Static and Temporary Variables (V5.0 and higher)

Date: File:GRAPH_04e.12 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives test functionevolution disturbances The test function visualizes evolution and disturbances of the sequencer. Overview Active and disturbed steps Valid and satisfied transitions Skipped steps and transitions Single Page Overview display Program status of transitions Status of actions Undisturbed and total activation time of steps Status in Overview and Single Page Display

Date: File:GRAPH_04e.13 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Single step display Active and disturbed steps Valid and satisfied transitions Skipped steps and transitions Program status in LAD/FBD for Supervision, interlock, transition Status of actions Action block Timers Undisturbed (U) and total (T) runtime of a step Status in Single Step (Detail View)

Date: File:GRAPH_04e.14 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives 1. S7-GRAPH FB+DB in CPU identical with S7 project (accessible nodes without S7 project) 2. Activate 3. Status of sequencer for FB x is active in all open windows Activating the Test Functions

Date: File:GRAPH_04e.15 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Sequencer Status and Programming Mode

Date: File:GRAPH_04e.16 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Sequencer Status, Monitor/Modify Variables

Date: File:GRAPH_04e.17 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Control Sequencer (1)

Date: File:GRAPH_04e.18 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Control Sequencer (2)

Date: File:GRAPH_04e.19 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Control Sequencer (3)

Date: File:GRAPH_04e.20 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Control Sequencer (4)

Date: File:GRAPH_04e.21 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Synchronization (1)

Date: File:GRAPH_04e.22 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Synchronization (2)

Date: File:GRAPH_04e.23 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Exercise (1): Start-Up Using 'Control Sequencer' Function

Date: File:GRAPH_04e.24 SIMATIC S7 Siemens AG All rights reserved. SITRAIN Training for Automation and Drives Exercise (2): Start-Up Using Self-Defined Parameter Set