MSC.Software Corporation 2 MacArthur Place Santa Ana, CA 92707, USA Tel: (714) Fax: (714) Web: United States MSC.Patran Support Tel: Fax: (714) Tokyo, Japan Tel: Fax: Munich, Germany Tel: (+49) Fax: (+49) New Features in MSC.Patran November 2005 PAT328 Course Notes Part Number: P3*V2005r2*Z*Z*Z*SM-PAT328-NT1
DISCLAIMER MSC.Software Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice. The concepts, methods, and examples presented in this text are for illustrative and educational purposes only, and are not intended to be exhaustive or to apply to any particular engineering problem or design. MSC.Software Corporation assumes no liability or responsibility to any person or company for direct or indirect damages resulting from the use of any information contained herein. User Documentation: Copyright 2004 MSC.Software Corporation. Printed in U.S.A. All Rights Reserved. This notice shall be marked on any reproduction of this documentation, in whole or in part. Any reproduction or distribution of this document, in whole or in part, without the prior written consent of MSC.Software Corporation is prohibited. MSC and MSC. are registered trademarks and service marks of MSC.Software Corporation. NASTRAN is a registered trademark of the National Aeronautics and Space Administration. MSC.Nastran is an enhanced proprietary version developed and maintained by MSC.Software Corporation. MSC.Patran is a trademark of MSC.Software Corporation. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS SectionPage Part 1: 2005 Version 1.0 General Enhancements MPC Numbering …………..………………………………………………………………………………………..1-4 Field Enhancement…...…………………………………………………………………………………………….1-13 LBC Display Enhancement ……………………………………………………………………………………… CAD Import: Groups from Layers ………………………………………...………………………………………1-29 Pro/E Material Import Enhancement…………………………………………………………………………… Direct Pro/E Mesh……………………...…………………………………...………………………………………1-45 CAD Export……………….. ……………………………………………………………………………………… Results Title Editor……………… ………………………………………...………………………………………1-59 Combined Component Plots …………………………………………………………………………………… Scalar Marker Tool………………. ………………………………………...………………………………………1-65 Quick Plot Animation…...………………………………………………………………………………………….1-68 Results Type Naming Consolidation …………………………………………………………………………… Plot Set Utility ………………………………………...………………………………….…………………………1-79 Advanced Surface Mesher Phase II…………………………………………………………………………… MSC.Nastran Preference CWELD and CFAST Elements……. ……………………………………………………………………………..2-4 Lagrange Rigid Element ………………………………………………………………………………………… Explicit Nonlinear (SOL 700)………………...…………………………………………………………………….2-16 Double Precision Support ……………………………………………………………………………………… External Superelement…………. ………………………………………...………………………………………2-38 System Cell………………………….…………………………………………………………………………… Preserve Nastran Names………………….……………………………...………………………………………2-48 Control on CHBDYG Numbering………………..……………………………………………………………… Geometry Check Options……………… …………………………….…...………………………………………2-58 K6ROT Defaults……………...…………………………………………………………………………………… DRA to DBALL………………………………………………………………………………………………………2-63 PCOMPG Composite Properties …...…………………………………………………………………………….2-68 SOL 600………………………. …………………………………………………………………………………….2-84 Quick Topology Optimization………………. ………………………………………...……………….…………2-100
TABLE OF CONTENTS (cont.) SectionPage Part 1: 2005 Version 3.0 General Preference MARC Preference………………..……………………………………………………………………………….3-3 DYTRAN Preference ………………………………………………………………………………………………3-13 ABAQUS Preference…………..………………………………………………………………………………….3-23 ABAQUS Thermal Preference…………..……….……………………………………………………………….3-37 MSC Patran Thermal..…………………………………………………………………………………………… Field CSV Import 5.0 Results Title Editor 6.0 Plot Set 7.0 Advanced Surface Mesher 8.0 CWELD and CFAST Connectors 9.0 PCOMPG Composites 10.0 Topology Optimization 11.0 Workshops Importing a Temperature Field….………………………………………………………………………………. WS1-1 Importing a Pressure Field….………...…………………………………………………………………………. WS2-1 Results Title Editor.……….…..…………………………………………………………………………………...WS3-1 Plot Set…………………………..…………………………………………………………………………………WS4-1 Advanced Surface Mesher Tria Element Surfaces…..…………..……….…………………………………...WS5-1 Advanced Surface Mesher Tesselated Surfaces………………………….……………………………………WS6-1 CWELD and CFAST Connectors ………………..……….…………………………………………….……… WS7-1 PCOMPG Results Viewing………..……………………………………………………………………………...WS8-1 Topology Optimization……………………………………………………………………………………………..WS9-1
TABLE OF CONTENTS (cont.) SectionPage Part 2: 2005r2 Version 1.0 Nastran Preference Sol 600 Gasket Element………….……………………………………………………………………………….1-1 Sol 700 ……………………………..……………………………………………………………………………….1-18 Quick Topology Optimization………………………………………………………………………………………1-34 Arbitrary Beam….…..…………..………………………………………………………………………………….1-56 Beam Offsets………………….…………..……….……………………………………………………………….1-67 Nested Coordinate Systems..…………………………………………………………………………………… Cord 1X…………………………….……………………………………………………………………………….1-88 SUBCOM/SUBSEQ Support…………..………………………………………………………………………….1-97 MSC.Nastran Optimization Support ……………………………………...………………………………………1-112 Non-Structural Mass Properties….…..…………..………………………………………………...…………… CFAST……...………………….…………..……….……………………………………………………………… Large XDB…………………....…………………………………………………………………………………… Random Solution…………………....…………………………………………………………………………… MARC Preference MARC Preference Enhancements………………..……………………………………………………..……… DYTRAN Preference DYTRAN Preference Enhancements…………………………………………………………………………… MSC.Patran Thermal MSC.Patran Thermal Preference Enhancements……………………………………………………………… ABAQUS Preference ABAQUS Preference Enhancements…………………….……………………………………………………… Laminate Modeler Laminate Modeler Solid Element Support…………..……….………………………………………………….6-1
TABLE OF CONTENTS (cont.) SectionPage Part 2: 2005r2 Version 7.0 CAD Integration Direct Parasolid Translator Update………..………….……………………………………………………...….7-1 Parasolid based IGES translator…..…………………………………………………………………………….7-15 Import Attributes Option for CATIAV5……………………………………………………………………………7-21 Repeat Import of Geometry (CAD Integration)….…..…………..…………………………………………….7-24 Parameterized Geometry Creation (P-Shapes)……….…….………………………………………………….7-32 Creation of Parameterized Solids During Import..…………………………………………………………… Groups/Meshing Group Hierarchy………………….………………..……………………………………………………..……….8-1 Advanced Surface Mesher Phase II……..……………….………………………………………………………8-20 Imprint – Assembly Meshing Wizard Assessment….………………………………………………………… Ease of Use LBC Memory Improvement…………..…………………….………………………………………………………9-1 Double-Precision Group Transform….…………………………………………………………………………..9-5 Field Spreadsheet Enhancement….………...……………………………………………………………………9-11 Magnitude Option for Transform Operations.……….…..…………………………………………………… Reverse B/W…………………………..………………………………………………………………..………… Timeout Enhancement…………………………………..…………..……….……………………………………9-31 Tools Menu…………………………………………………………………….…………………………………… Workshops Rigid Ball Penetration…………….………………………………………………………………………………. WS1-1 Tapered Beam Impact……….………...………………………………………………………………………….WS2-1 Topology Optimization.…….…..…………………………………………………………………………………...WS3-1 Solid Topology Optimization..…………………………………………………………………………………….WS4-1 Arbitrary Beam Section…………………………………..…………..……….…………………………………...WS5-1 Nested Coordinate Systems………………………………………………….……………………………………WS6-1 Cord1x Support…………………… ………………..……….…………………………………………….……… WS7-1 CAD Integration……………………..……………………………………………………………………………...WS8-1 Parameterized Geometry…………………………………………………………………………………………..WS9-1 Advanced Surface Mesher…………………………………………………………………………………………WS10-1 Imprint Assembly Meshing Wizzard……………………………………………………………………………...WS11-1