Published by Hyundai Motor company, june 2005 Integrated Memory System
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Memory Seat) Communication diagram Communication diagram ADM IMS(SEAT) Diagnostic CAN KWP2000 DDM IMS (S/C) IMS (S/C) BCM M/F SW LIN IMS Switch S/C Manual Switch S/C Manual Switch Rear Left P/W Switch Rear Left P/W Switch Rear Right P/W Switch Rear Right P/W Switch Seat Manual Switch Seat Manual Switch
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Memory Seat) Power Seat ECMLocation Buzzer
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Memory Seat) Sliding motor Sliding limit switch Rear height motor Front height motor
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Memory Seat) Power Seat SwitchIMS Switch
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Tilt & Telescope) Communication diagram Communication diagram ADM IMS(SEAT) Diagnostic CAN KWP2000 DDM IMS (S/C) IMS (S/C) BCM M/F SW LIN IMS Switch S/C Manual Switch S/C Manual Switch Rear Left P/W Switch Rear Left P/W Switch Rear Right P/W Switch Rear Right P/W Switch Seat Manual Switch Seat Manual Switch
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Tilt & Telescope) Steering Tilt & Telescope ECM Location
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Tilt & Telescope) Steering Tilt & Telescope limit switch Location Tilt limit switchTelescope limit switch
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS (Tilt & Telescope) Telescope Tilt
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS IMS Function IMS Function 1. Memory Regeneration 1. Memory Regeneration Push the switch "1" or "2" to get the memorized seat, outside and steering column mirror positions in the state of ignition key on. 2. Sequence Operation when getting on or off the vehicle 2. Sequence Operation when getting on or off the vehicle If ignition key is inserted in key cylinder, the steering column and seat position will move forward and down from the get off position. Prohibit condition (If one of the following conditions is built up, the function is prohibited.) - Auto switch is turned off. - Gear shift lever position is not P position (other position). - Controlled by manually.
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS 4. Memory location IMS Function IMS Function 3. Buzzer control -. Memory allow: Buzzer sounds once. -. Memory complete: Buzzer sounds twice. -. Memory regeneration: Buzzer sounds once -. Sensor malfunction: Buzzer sounds 10 times ItemsLocation Outside MirrorEach Door Modules (DDM & ADM) Power SeatIMS Power Seat Control Module Steering ColumnTilt & Telescope Control Module
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS IMS Function IMS Function 5. Prohibition to regeneration For safety, if one of the following conditions is built up, the memory regeneration is impossible. - When the manual switch of the driver seat is on. - When the manual switch of the driver seat is on. - When the IG key switch is off. - When the IG key switch is off. - When the gear shift lever position is not P. - When the gear shift lever position is not P. - When the vehicle speed exceeds 3 km/h. - When the vehicle speed exceeds 3 km/h.
BE-IMS © HMC & KMC reserves all rights of disposal such as copying and passing on to third parties. This book should be used for the training purpose IMS IMS Function IMS Function 6. How can inputs the memory position? - IG key switch on - Adjust the power seat for the optimum position. - Push the SET switch - And, push the position switch "1" or "2" within 5 seconds. - Memory position switch input should be done within 5 seconds after memory switch is on.