N.Topilin, JINR The engineering equipment and systems for NICA International Workshop NICA-SPIN 2013 JINR, Dubna, Russia, March , 2013 March 18, Monday N.Topilin

N.Topilin, JINR Гигиенические требования к организации технологических процессов, производственному оборудованию и рабочему инструменту Санитарно-эпидемиологические правила СП Дата введения: 25 июня 2003 г. 1

N.Topilin, JINR Standard lifting tool

N.Topilin, JINR Good floor – 50% of success

N.Topilin, JINR Pneumatic tool (Genie Super Hoist) GH m lifting height 136 kg load capacity GH m lifting height 113 kg load capacity Drill machine on magnetic base

N.Topilin, JINR Booster tunnel cross-section

N.Topilin, JINR Collider tunnel cross-section

N.Topilin, JINR Controlled Tightening Tool

N.Topilin, JINR Controlled Tightening Tool 1410 Nm

N.Topilin, JINR Useful tool

N.Topilin, JINR Heavy disk handling (Chamber f.e.)

N.Topilin, JINR Manipulator This Tool was used at CERN in years during ATLAS Tilecal assembly The great idea to use it for MPD magnet assembly and other similar objects : The Chain speed is 0.5 or 1.0 cm per sec

N.Topilin, JINR Manipulator using examples

N.Topilin, JINR MPD Magnet assembly with Manipulator

N.Topilin, JINR MPD Hall plane

N.Topilin, JINR MPD – Multi Purpose Detector – 1300 t 3 main variants of moving: 1 - Simple sliding, friction coefficient – 0.2; push/pull force = 260 t Normal surface hardness 2 – Rolling, friction coefficient – 0.05; push/pull force = 65 t High surface hardness 3 – Air pads, friction coefficient – 0.02; push/pull force = 26 t Normal surface hardness

N.Topilin, JINR Heavy objects moving

N.Topilin, JINR Heavy objects moving (cont)

N.Topilin, JINR 900 t (1600 t) object moves on air pads

N.Topilin, JINR Special lifting tool (with counterweight)

Scaffolding N.Topilin, JINR

Round ladders N.Topilin, JINR

N.Topilin, JINR VBLHEP JINR Auto gate Roll way gate Private zone

N.Topilin, JINR Dubna, VBLHEP JINR ?

N.Topilin, JINR THANK YOU FOR YOUR ATTENTION! СПАСИБО ЗА ВНИМАНИЕ! 25