MINISTRY OF EDUCATION AND SCIENCE OF THE REPUBLIC OF KAZAKHSTAN International humanitarian - technical university Theme: Human–computer interaction Prepared by: Turganbek N. Group: 102 – 37 Prepared by: Batyrbekova P.

Human–computer interaction Human–computer interaction (HCI) researches the design and use of computer technology, focused on the interfaces between people (users) and computers. Researchers in the field of HCI both observe the ways in which humans interact with computers and design technologies that let humans interact with computers in novel ways. As a field of research, human– computer interaction is situated at the intersection of computer science, behavioral sciences, design, media studies, and several other fields of study. The term was popularized by Stuart K. Card, Allen Newell, and Thomas P. Moran in their seminal 1983 book, The Psychology of Human–Computer Interaction, although the authors first used the term in 1980 and the first known use was in The term connotes that, unlike other tools with only limited uses (such as a hammer, useful for driving nails but not much else), a computer has many uses and this takes place as an open-ended dialog between the user and the computer. The notion of dialog likens human–computer interaction to human-to-human interaction, an analogy which is crucial to theoretical considerations in the field

Introduction Humans interact with computers in many ways; the interface between humans and computers is crucial to facilitating this interaction. Desktop applications, internet browsers, handheld computers, and computer kiosks make use of the prevalent graphical user interfaces (GUI) of today.[5] Voice user interfaces (VUI) are used for speech recognition and synthesising systems, and the emerging multi-modal and Graphical user interfaces (GUI) allow humans to engage with embodied character agents in a way that cannot be achieved with other interface paradigms. The growth in human–computer interaction field has been in quality of interaction, and in different branching in its history. Instead of designing regular interfaces, the different research branches have had a different focus on the concepts of multimodality rather than unimodality, intelligent adaptive interfaces rather than command/action based ones, and finally active rather than passive interfaces. The Association for Computing Machinery (ACM) defines human–computer interaction as "a discipline concerned with the design, evaluation and implementation of interactive computing systems for human use and with the study of major phenomena surrounding them". An important facet of HCI is user satisfaction (or simply End User Computing Satisfaction). "Because human–computer interaction studies a human and a machine in communication, it draws from supporting knowledge on both the machine and the human side. On the machine side, techniques in computer graphics, operating systems, programming languages, and development environments are relevant. On the human side, communication theory, graphic and industrial design disciplines, linguistics, social sciences, cognitive psychology, social psychology, and human factors such as computer user satisfaction are relevant. And, of course, engineering and design methods are relevant." Due to the multidisciplinary nature of HCI, people with different backgrounds contribute to its success. HCI is also sometimes termed human–machine interaction (HMI), man-machine interaction (MMI) or computer-human interaction (CHI).

Goals for computers Human–computer interaction studies the ways in which humans make, or do not make, use of computational artifacts, systems and infrastructures. In doing so, much of the research in the field seeks to improve human–computer interaction by improving the usability of computer interfaces.[9] How usability is to be precisely understood, how it relates to other social and cultural values and when it is, and when it may not be a desirable property of computer interfaces is increasingly debated. Much of the research in the field of human–computer interaction takes an interest in: Methods for designing new computer interfaces, thereby optimizing a design for a desired property such as learnability or efficiency of use. Methods for implementing interfaces, e.g., by means of software libraries. Methods for evaluating and comparing interfaces with respect to their usability and other desirable properties. Methods for studying human computer use and its sociocultural implications more broadly. Models and theories of human computer use as well as conceptual frameworks for the design of computer interfaces, such as cognitivist user models, Activity Theory or ethnomethodological accounts of human computer use. Perspectives that critically reflect upon the values that underlie computational design, computer use and HCI research practice. Visions of what researchers in the field seek to achieve vary. When pursuing a cognitivist perspective, researchers of HCI may seek to align computer interfaces with the mental model that humans have of their activities. When pursuing a post-cognitivist perspective, researchers of HCI may seek to align computer interfaces with existing social practices or existing sociocultural values. Researchers in HCI are interested in developing design methodologies, experimenting with devices, prototyping software and hardware systems, exploring interaction paradigms, and developing models and theories of interaction.

Differences with related fields This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (February 2013) (Learn how and when to remove this template message) HCI differs from human factors and ergonomics as HCI focuses more on users working specifically with computers, rather than other kinds of machines or designed artifacts. There is also a focus in HCI on how to implement the computer software and hardware mechanisms to support human–computer interaction. Thus, human factors is a broader term; HCI could be described as the human factors of computers – although some experts try to differentiate these areas. HCI also differs from human factors in that there is less of a focus on repetitive work-oriented tasks and procedures, and much less emphasis on physical stress and the physical form or industrial design of the user interface, such as keyboards and mouse devices. Three areas of study have substantial overlap with HCI even as the focus of inquiry shifts. Personal information management (PIM) studies how people acquire and use personal information (computer based and other) to complete tasks. In computer-supported cooperative work (CSCW), emphasis is placed on the use of computing systems in support of the collaborative work. The principles of human interaction management (HIM) extend the scope of CSCW to an organizational level and can be implemented without use of computers.

Design Software and hardware must be matched, so that the processing of the user input is fast enough, the latency of the computer output is not disruptive to the workflow. When evaluating a current user interface, or designing a new user interface, it is important to keep in mind the following experimental design principles: Early focus on user(s) and task(s): Establish how many users are needed to perform the task(s) and determine who the appropriate users should be; someone who has never used the interface, and will not use the interface in the future, is most likely not a valid user. In addition, define the task(s) the users will be performing and how often the task(s) need to be performed. Empirical measurement: Test the interface early on with real users who come in contact with the interface on a daily basis. Keep in mind that results may vary with the performance level of the user and may not accurately depict the typical human–computer interaction. Establish quantitative usability specifics such as: the number of users performing the task(s), the time to complete the task(s), and the number of errors made during the task(s). Iterative design: After determining the users, tasks, and empirical measurements to include, perform the following iterative design steps: Design the user interface Test Analyze results Repeat Repeat the iterative design process until a sensible, user-friendly interface is created.

Methodologies A number of diverse methodologies outlining techniques for human–computer interaction design have emerged since the rise of the field in the 1980s. Most design methodologies stem from a model for how users, designers, and technical systems interact. Early methodologies, for example, treated users' cognitive processes as predictable and quantifiable and encouraged design practitioners to look to cognitive science results in areas such as memory and attention when designing user interfaces. Modern models tend to focus on a constant feedback and conversation between users, designers, and engineers and push for technical systems to be wrapped around the types of experiences users want to have, rather than wrapping user experience around a completed system. Activity theory: used in HCI to define and study the context in which human interactions with computers take place. Activity theory provides a framework to reason about actions in these contexts, analytical tools with the format of checklists of items that researchers should consider, and informs design of interactions from an activity-centric perspective. User-centered design: user-centered design (UCD) is a modern, widely practiced design philosophy rooted in the idea that users must take center-stage in the design of any computer system. Users, designers and technical practitioners work together to articulate the needs and limitations of the user and create a system that addresses these elements. Often, user-centered design projects are informed by ethnographic studies of the environments in which users will be interacting with the system. This practice is similar to participatory design, which emphasizes the possibility for end- users to contribute actively through shared design sessions and workshops.

Display designs Displays are human-made artifacts designed to support the perception of relevant system variables and to facilitate further processing of that information. Before a display is designed, the task that the display is intended to support must be defined (e.g. navigating, controlling, decision making, learning, entertaining, etc.). A user or operator must be able to process whatever information that a system generates and displays; therefore, the information must be displayed according to principles in a manner that will support perception, situation awareness, and understanding.

Human–computer interface The human–computer interface can be described as the point of communication between the human user and the computer. The flow of information between the human and computer is defined as the loop of interaction. The loop of interaction has several aspects to it, including: Visual Based :The visual based human computer inter-action is probably the most widespread area in Human Computer Interaction (HCI) research. Audio Based : The audio based interaction between a computer and a human is another important area of in HCI systems. This area deals with information acquired by different audio signals. Task environment: The conditions and goals set upon the user. Machine environment: The environment that the computer is connected to, e.g. a laptop in a college student's dorm room. Areas of the interface: Non-overlapping areas involve processes of the human and computer not pertaining to their interaction. Meanwhile, the overlapping areas only concern themselves with the processes pertaining to their interaction. Input flow: The flow of information that begins in the task environment, when the user has some task that requires using their computer. Output: The flow of information that originates in the machine environment. Feedback: Loops through the interface that evaluate, moderate, and confirm processes as they pass from the human through the interface to the computer and back. Fit: This is the match between the computer design, the user and the task to optimize the human resources needed to accomplish the task.