Influence of neutron irradiation parameters on swelling and mechanical properties of stainless steels - materials of BN-350 fuel assembly ducts O.P.Maksimkin,

Презентация:



Advertisements
Похожие презентации
Protein-water interactions Water associated with proteins can be described as being one of the following three types: Free water Associated (bound) water.
Advertisements

Recent advances in intercalation compounds physics.
,, Work better in near space Advantage – find a global minimum in near space. Nelder-Mead base technique on Rosenbrock function. 1 min 40 sec to solve.
Absorption spectra of AgHal emulsions Absorption spectra of ultra-fine-grained AgCl (a), AgBr (b) and AgI (c) photolayers (photoemulsions). Exposured layer.
The Pulse Generator for the Supersonic Flow Structure Control ГЕНЕРАТОР ИМПУЛЬСОВ ДЛЯ УПРАВЛЕНИЯ СТРУКТУРОЙ СВЕРХЗВУКОВОГО ПОТОКА Khristianovich Institute.
I chose specialty of radio engineering, electronics and telecommunications.
AFM-Raman and Tip Enhanced Raman studies of modern nanostructures Pavel Dorozhkin, Alexey Shchekin, Victor Bykov NT-MDT Co., Build. 167, Zelenograd Moscow,
Optical properties of colloidal particles : Silver colloidal particles evaporated in high vacuum on Formvar supporting film (a)- absorption spectrums,
Professor: El Sayed Negim Magistr: Sadenova Aigerim Almaty 2015 Theme: Effects of available nitrogen on the uptake and assimilation of ferrocyanide and.
PAT312, Section 16, December 2006 S16-1 Copyright 2007 MSC.Software Corporation SECTION 16 MATERIALS.
Специализированный источник синхротронного излучения Anka Характеристики и экспериментальные возможности.
MATHEMATICAL MODEL OF ICE SHEET DEFORMATION CAUSED BY SUBMARINE MOTION V. M. Kozin, V. L. Zemlak, S. D. Chizhiumov Shipbuilding Department, State Technical.
Theoretical investigation of microstrip transmission lines and resonators on artificial magnetic media I. A. Kolmakov, IEEE member St.-Petersburg Electrotecnical.
Econometrics. Econometrics is "the application of mathematics and statistical methods to economic data" and described as the branch of economics "that.
Association of atoms : 1. Spontaneous 2. Successive grow (Markovs chains): A 1 – atom or molecule, A i – cluster of i-size. A 1 + A 1 = A 2 A 2 + A 1 =
Factorial in mathematics, the factorial of a non-negative integer n, denoted by n!, is the product of all positive integers less than or equal to n. For.
S9-1 PAT328, Section 9, September 2004 Copyright 2004 MSC.Software Corporation SECTION 9 SUPPORT OF MSC.NASTRAN PLY DEFINITION (PCOMPG) BY MSC.PATRAN v2005.
WS5-1 PAT328, Workshop 5, May 2005 Copyright 2005 MSC.Software Corporation WORKSHOP 5 ARBITRARY BEAM SECTION.
WS7-1 PAT328, Workshop 7, September 2004 Copyright 2004 MSC.Software Corporation WORKSHOP 7 CWELD AND CFAST CONNECTORS.
S18-1PAT301, Section 18, October 2003 SECTION 18 BRIEF INTRODUCTION TO THE FINITE ELEMENT METHOD.
Транксрипт:

Influence of neutron irradiation parameters on swelling and mechanical properties of stainless steels - materials of BN-350 fuel assembly ducts O.P.Maksimkin, M.N.Gusev, K.V.Tsai, O.G.Romanenko, L.G.Turubarova, N.S.Silnyagina, O.V.Tivanova Almaty, Kazakhstan Republic, 2005 Laboratory of the materials physical-mechanical properties investigations,

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Report contents Mechanical properties of investigated steels Influence of damage dose rate on microstructure and swelling of investigated steels. Peculiarities of plastic deformation of highly irradiated materials.

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Investigated materials 08Cr16Ni11Mo3 12Cr18Ni10Ti поток нейтроно в Т, о С Object of investigation – hexagonal shroud of fuel assemblies Samples sizes: mm. Neutron flux

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Irradiation condition for investigated steels Assembly, mark. 08Cr16Ni11Mo3 N-214(2) 08Cr16Ni11Mo3 V Cr16Ni11Mo3 V Cr18Ni10Ti, N-214(1) 0 Dose, dpa [T,C]15.6 [337°]17.1 [354°] Damage rate, dpa/s Dose, dpa [T,C]-11.0 [346°]12.1 [354°]7.1 [309°] Damage rate, dpa/s Dose, dpa [T,C]7.08 [309°]10.8 [302°]11.9 [305°] Damage rate, dpa/s Dose, dpa [T,C]1.27 [281°] Damage rate, dpa/s Dose, dpa [T,C]0.25 [280°] Damage rate, dpa/s

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Experimental equipment and investigation techniques Uniaxial tensile mechanical test. (definition of 02 В, full ). Transmission and scanning electron microscopy (concentration and morphology of radiation defects, swelling value). Metallography and microhardness measurement. Magnitometry and optical extensometry.

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Influence of irradiation on mechanical properties of 08Cr16Ni11Mo3 steel B 02

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Correlation between yield stress and microhardness

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Changes in density of irradiated 08Cr16Ni11Mo3 steel

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Swelling of irradiated 08Cr16Ni11Mo3 steel

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Voids in irradiated 08Cr16Ni11Mo3 steel N-214, «-900», 1.27 dpa., dpa/s N-214(2), «-500», 7.08 dpa N-214(2), «0», 15.6 dpa dpa/sТВС «V-337», 11.9 dpa, dpa/s

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Voids in irradiated 12Cr18Ni10Ti, assembly N-214(1) 50 nm Dose 0.67 dpa, Dose rate 0, dpa/s, T irr = 281°С

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Influence of dose rate on yield stress of 08Cr16Ni11Mo3

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Peculiarities of plastic deformation and fracture of high irradiated samples SEM image of fracture surface for specimen from «-1200mm» mark (08Cr16Ni11Mo3 steel). The deformation relief develops in zone of localized deformation

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Method of mark extensometry for miniature irradiated samples

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Distribution of strains and stresses on on deformed sample of 08Cr16Ni11Mo3 steel σ ист, кг/мм 2 Рабочая длина образца ε, % Рабочая длина образца V-337, -500.

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Engineering curves and dependences true stress – conditional strain Unirradiated steel Irradiated (V-337, -500) «true» curves

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Relationship between true stress and true strain for irradiated 08Cr16Ni11Mo3 steel

Laboratory of the materials physical-mechanical properties investigations, INP NNC RK Conclusion The changes in structure and mechanical properties of 08Cr16Ni11Mo3 and 12Cr18Ni10Ti steels – as materials of spent fuel assemblies of BN-350 reactor – irradiated up to damage doses 0.25 – 15.6 dpa at dose rate from to dpa/s were investigated. It was found that the dose rate is one of important factors influencing on void formation and development as well as on formation of mechanical properties of investigated materials. The void formation at low dose rates and low damage doses (1.27 dpa for 08Cr16Ni11Mo3 steel and 0.67 dpa for 12Cr18Ni10Ti steel) was observed. The method of mark extensometry was proposed and applied for investigation of peculiarities of plastic deformation of miniature specimens irradiated at various dose rates. It was shown that relation between true stresses and true strains at localized deformation of high irradiated steel samples can be described by equation =k