ABL5 - Troubleshooting 1 RED SYSTEM. ABL5 - Troubleshooting 2 RED SYSTEM System Status RecordsCal Status Operators Manual, Chapter 8 Troubleshooting Tools.

Презентация:

Advertisements

Похожие презентации

ABL5 – Set-up Programs 1 RED SYSTEM ABL5 Main Menu CalibrationUtilities 1. Cal 1 2. Cal 2 1. Standby 2. Setup System status 1. Records 2. Cal Status 1.RADIOMETER.

Advertisements

ABL5 - Maintenance 1 RED SYSTEM. ABL5 - Maintenance 2 RED SYSTEM Easy Maintenance Divided into 4 groups Daily Weekly Monthly Half yearly Maintenance.

QUALITY CONTROL 1 The Importance of Accurate Results NCCLS: National Committee for Clinical Laboratory Standards NCCLS Blood gas and pH analysis has more.

ABL5 - Introduction 1 RED SYSTEM ABL5 pH, pCO 2,pO 2Blood Gas:pH, pCO 2, pO 2 Sample volume 85 L for all three parameters Sample volume 35 L for pH only.

© 2005 Cisco Systems, Inc. All rights reserved. BGP v Optimizing BGP Scalability Limiting the Number of Prefixes Received from a BGP Neighbor.

ABL5 - Calibration 1 RED SYSTEM ± Sensitivity ± Zero point ± Drift ± 1 point calibration ± 2 point calibration ± Status value.

© 2009 Avaya Inc. All rights reserved.1 Chapter Four, UMS Web Services Module Three – Exchange 2007.

Who will Win in the Dash to the Finish? Click Here to Start.

Standard I/O and Pipes. Standard Input and Output Linux provides three I/O channels to Programs Standard input (STDIN) - keyboard by default Standard.

© 2006 Cisco Systems, Inc. All rights reserved. BCMSN v Minimizing Service Loss and Data Theft in a Campus Network Preventing STP Forwarding Loops.

© 2009 Avaya Inc. All rights reserved.1 Chapter Four, UMS Web Services Module One – UMS.

USB Download Manual (v1.3) (GP2 Year 2010) LG Electronics/ LCD TV Division Feb. 17 th, Applied Models & Notice - File Copy - User Download Mode.

© 2005 Cisco Systems, Inc. All rights reserved.INTRO v Operating and Configuring Cisco IOS Devices Starting a Switch.

Running Commands & Getting Help. Running Commands Commands have the following syntax: command options arguments Each item is separated by a space Options.

© 2009 Avaya Inc. All rights reserved.1 Chapter Nine, Voic Pro in SCN Module Four – Distributed Voic Pro.

© 2006 Cisco Systems, Inc. All rights reserved. HIPS v Using CSA Analysis Configuring Application Behavior Investigation.

© 2009 Avaya Inc. All rights reserved.1 Chapter Nine, Voic Pro in SCN Module Three – Backup Voic Pro.

Cooling Box Centennial / Equus Copyright 2009 All rights reserved. No part of this material may be reproduced, stored in any retrieval system or transmitted.

© 2005 Cisco Systems, Inc. All rights reserved. BGP v BGP Transit Autonomous Systems Monitoring and Troubleshooting IBGP in a Transit AS.

Loader Design Options Linkage Editors Dynamic Linking Bootstrap Loaders.

Транксрипт:

ABL5 - Troubleshooting 1 RED SYSTEM

ABL5 - Troubleshooting 2 RED SYSTEM System Status RecordsCal Status Operators Manual, Chapter 8 Troubleshooting Tools

ABL5 - Troubleshooting 3 RED SYSTEM System Status All error messages are registered in the System Status Messages will be cleared when appropriate conditions have been met Divided into 3 Groups General record: mechanical or electronic malfunction messages Measurement record: errors recorded during measurements Calibration record: errors recorded during calibrations

ABL5 - Troubleshooting 4 RED SYSTEM Records ? in System Status field indicates records present in: General record Calibration record No ? from records present in: Measurement record System Status field

ABL5 - Troubleshooting 5 RED SYSTEM General Record Refers to mechanical or electronic malfunction messages lack of liquids or gases temperature faults during measurement or calibration mechanical defects or failures 10. Not used 11. MAINT. PROG ERROR 12. Not used 13. Not used 14. Not used 15. LS ERROR 16. PRINTING ERROR 17. SENDING ERROR 18. LEAK DETECTED 1. TEMP ERROR 2. GAS ERROR 3. RINSE ERROR 4. BARO ERROR 5. Not used 6. CAL NEEDED 7. Not used 8. Not used 9. pO2 FLUSH ERROR

ABL5 - Troubleshooting 6 RED SYSTEM Messages Messages in System Status RINSE ERROR Stays in START UP Records indicated by a flashing ? General record Calibration record Records without screen message Measurement record

ABL5 - Troubleshooting 7 RED SYSTEM Marking of Results Unreliable results due to an error will be noted with questions marks,"?" "?" for all the relevant measured and derived parameters

ABL5 - Troubleshooting 8 RED SYSTEM System status

ABL5 - Troubleshooting 9 RED SYSTEM General recordMeasurement recordCalibration record 1. TEMP ERROR1. pH ERROR1. pH ERROR 2. GAS ERROR2. pCO 2 ERROR2. pCO 2 ERROR 3. RINSE ERROR3. pO 2 ERROR3. pO 2 ERROR 4. BARO ERROR4. BARO OUT OF RANGE4. BARO OUT OF LIMITS 5. Not used5. Not used5. CAL 2 ERROR 6. CAL NEEDED6. Not used6. Not used 7. Not used7. MEAS. TEMP ERROR7. CAL TEMP ERROR 8. Not used8. Not used8. Not used 9. pO2 FLUSH ERROR9. Not used9. Not used 10. Not used10. MEAS. LS ERROR10. Not used 11. MAINT. PROG ERROR11. MEAS. ERROR11. Not used 12. Not used12. CAL RINSE ERROR 13. Not used13. CAL SOLUTION ERROR 14. Not used 15. LS ERROR 16. PRINTING ERROR 17. SENDING ERROR 18. LEAK DETECTED